CT Race Worx Can-Am Maverick X3 Tie Rods with integrated Bump Steer Control for 72″ Models
These Race Edition Maverick X3 Tie Rods will never leave you stranded, they feature 1.125″ solid billet 7075 aluminum rod with wrench flats. We use only the best joints on the market which are JMX series FK 5/8 rod end.
These joints use a fabric based Teflon liner known as a PTFE liner.
The inner joint housing is compressed to create a preload on the ball that will stay tight roughly 3 times longer than a standard injected Teflon rod end, which is standard in the industry.
The length is cut to have maximum thread engagement on the rod end while still keeping full adjustment.
We use a thread forming tap which compresses the aluminum vs cutting away material with a conventional tap. This allows for the strongest threads possible.
Threads onto factory inner tie rod.
Our misalignment spacers are 303 stainless steel and feature ST BSC geometry.
This moves the pivot point of the outer tie rod down to help with bump steer.
What is Bump Steer: Bump steer is a change in toe setting (front of tires closer together than the rear of the tires) through the cycle of front suspension travel. The best set up is as close to zero toe change as possible. If your front tires change toe setting they are essentially doing the same thing as you turning the steering wheel slightly on every bump you hit. Bump steer is one of the biggest contributors to steering wheel feedback, twitchy drive ability, excessive front end wear and worn out forearms from trying to keep the car straight.
If You are Looking for Just The Rods, They are Located “HERE”
Sold in pair.
Learn More About “CT Race Worx”