Quick Release LED Whips, Two Piece Design

From: $289.99


As Low As 0% Up To 24 Months, Available"Financing Options"

No Switch Included

None Yes, Standard Wiring Harness +$34.99
None Yes, Blue (0008B-A) +$19.99 Yes, Red (186R-A) +$19.99 Yes, Green (187G-A) +$19.99

Add to Wishlist

Whip It Light Rods Products

SKU: WI-QUICKMAGWHIP Categories: , , , ,

Whipit Lights LED Whips, With Quick Release Base

Industry Leader In Quick Release LED Light Whips Now Gives You A Billet Aluminum Quick Release With 360 Degrees of Color And Chasing Ability Bluetooth

Easy Removal – Non-Rotating Quick Disconnect Base with 6063 Aviation Aluminum

360 Degrees of Awesome Color – Insanely bright LEDs always ensure you’re visible and a unique spiraled design means you get more LEDs per foot of whip.

Sync Combo set comes with Brake and Turn Signal Function. Even control your Whip It Light Rods Rock Lights using the same App.

Brightness and visibility are increased by 2-3 times compared with single row designed whips.

Hard Tube, EVA transparent heat shrinkable hard tube that can withstand high impact forces. Enhanced impact resistance to increase durability and withstand any harsh terrain.

UNRIVALED VARIETY – Chasing function with 300 different colors and 200 patterns, including flash, strobe and fade-through-colors, stream, cascade and different color combinations from top, bottom and middle; adjust speed/brightness or lock on one color.


Whipit LED Whips Overview
  • IP 67 Dust and Waterproof
  • Mounting base:6063 Aviation Aluminum
  • Rubber ring at the connection of quick connect base, to prevent sand from entering and causing wear of the base, especially when riding on sand dunes.
  • Hard PC Thick Wrapped Tube
  • Includes: Remote, Wiring Harness, Black Whip It Flag, American Flag, Flag Hardware and Install Instructions.
  • LED Quantity: 3FT/165PCS, 5FT/300PCS (Pair *2)
  • Operate 12V DC.
  • LED lifespan:50000 Hours
  • Patent Pending
  • 1 year warranty
Whipit LED Whips Sample
Led Light Whips, Spring And Magnetic Quick Release

Included Flag System

  • 2 – Whipit flags (12″ x 17.5″)
  • 2 – American Flags (12″ x 17.5″)
  • 4 – Rubber Mounting Clamps
  • 4 – Easy Clips To Add And Remove Flags
  • Nuts, Bolts And Install Hardware
Led Light Whips, Spring And Magnetic Quick Release
Whipit Lights App Overview

Bluetooth App:

  • Connects to your smartphone via Bluetooth App Pro RGB®
  • 16 million colors Plus 188 + chasing RGB combination
  • Adjustable speed / brightness o DIY Color / Chasing Mode
  • Timing Function to Bluetooth Connection
  • Sync lighting to music
  • DIY Create Your Own Design
  • Apple And Android
  • Controller: Blu Sync control, which all come with password lock function, DIY function, Music Function, App interface and light synchronization display function.


Install Guide

Download Document

Tips, Trick's And Warranty Info

Download Document

Install Overview


S & K Manufacturing Inc/Whip It Light Rods warrants our products to be free from manufacturing defects in material and workmanship for 12 months from date of purchase, subject to the terms and conditions provided in this Limited Warranty.

See Further Details And Warranty Form “HERE”

Terms and Conditions

This Warranty is valid and applies only when Whip It Light Rod products are properly wired and installed in accordance with the product installation tips listed above and all applicable safety standards. Whip It Light Rods shall not be liable for any incidental or consequential damages in connection with the use of our products or for any indirect damages, including, but not limited to, damage to property. Our liability with respect to defects, is for replacement or repair of the defective product. Our Warranty does not apply to any of the following situations:

  • Products that have been physically damaged or which have been subjected to abuse by the consumer.

  • Products that have not been tested through direct connection to the vehicle battery as described in Installation Tips.

  • Products that have been damaged due to improper installation.

  • Products that show signs of gouges, impact scratches or cracks on the led tubes caused by consumer.

  • Products that show tears in the shrink wrap caused by the consumer.

  • Products that have been modified, altered or repaired by the consumer or installer. Altering includes, but is not limited to,    cutting wires on the controller, cutting the whips to be shorter, rewiring original wiring setup, changing the pin configuration,  etc.).

  • Products that have been submerged. Our whips are water resistant but full submersion voids the manufacturer defect warranty.

How to Make a Warranty Claim

In the event of a defective product claim, S & K Manufacturing Inc./Whip It Light Rods requires you to complete the attached form and send a copy with your request for warranty. Include proof of consumer purchase date from dealer. We will complete a warranty inspection. If the claim is approved, we will replace or repair the product at no charge.


S & K Manufacturing Inc/Whip It Light Rods

Warranty Claims

2387 Vernon Rd

Stoughton, WI 53589

In Stock Items:

Any Items Currently In Stock Ship Within 36 – 48 Hours or Sooner After Order is Placed, Monday Through Friday Except Holidays, Any orders Placed on Saturday or Sunday Your Processing Time will Start On Next Business Day.

Make Model Year
All Universal FitmentATV Machine - Universal Fitment
All Universal FitmentUTV Machine - Universal Fitment

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.


Continue as a Guest

Don't have an account? Sign Up