Ice Crusher Cab Heater For Honda Talon Models
Get Out Of The Cold With These Full Honda Talon Cab Heater With Included Defrosters. Powerfull BTU Heater, Vents, Hoses And Full Install Guide Gets You Warm.
Reclaim what you love about winter by heating your Honda Talon with an Ice Crusher UTV Cab Heater!
The Ice Crusher Honda Talon cab heater is a complete aftermarket cab heater kit that was created for the average Do-It-Yourselfer.
The Ice Crusher Honda Talon cab heater kit includes 6x 360 degree rotatable vents that are styled to fit the modern look of your interior. Three of the six vents can be directed to defrost the windshield or directed into the cab for additional warming. There are three vents on the driver side and three vents on the passenger side along with an air intake port that pulls warm air directly from inside the cab. This boosts heating performance when compared to heating cold air from outside the cab.
The heater kit is compatible with OEM windshield wiper kits and mounts behind the radiator for a clean looking installation. One differentiating feature of the Ice Crusher kit is the addition of a splash guard bracket that prevents snow from being ingested into the motor which causes moisture to be blown on the windshield. The heater unit draws hot coolant from the engine’s Oil Cooler Bypass and doesn’t require any additional Thermostat Bypass hardware.
Want even better heating performance? Add the NEW Ice Crusher Auxiliary Water Pump option and get more heat even at idle! The low amp draw electric water pump boosts coolant flow rates through the heater regardless of vehicle RPM adding even more heat output into the cab.
The Ice Crusher Honda Talon cab heater kit includes all specialty tools, fittings, wiring, hoses, vents, and brackets to perform a professional grade install. We provide picture rich instructions that walk you step-by-step through the installation process.
ADD ON Auxiliary Water Pump Kit
Take your Honda Talon Heater to next level with an Ice Crusher auxiliary water pump kit. At idle and low RPM’s the pump boosts pressure and coolant flow rate through the heater core which in turn delivers even more heat to your cab.
Please note, installing the Honda Talon Water Pump Kit after a heater is already installed will require a coupler to repair the already cut coolant line at the engine. The Auxiliary Water Pump utilizes the Oil Cooler Bypass line instead of the main radiator line from the engine.
The kit includes:
- 12 Volt Automotive Grade Water Pump
- Hardware to mount directly into a metal base as well as through-hole hardware for installing via a bracket
- 12 Foot wiring harness allows for installation flexibility
- Backlit Dash Switch for On/Off control
Add Hose Clamps
Make your heater install faster and easier with Ice Crusher Hose Clamp Off Tools. These clamp tools will keep coolant from pouring out of your vehicle when tying into the coolant system. They also keep the majority of air from entering the coolant system dramatically reducing the effort required to remove air bubbles later. The clamps will seal-off flexible hoses up to 1 3/4″ inch in diameter and will fit all ATV and UTV applications. Kits are sold in pair.
- Each line clamp is specially designed to stop flow without damaging or compromising the hose, making them a great set of clamps for any professional or home garage!
- Fits Hose Sizes up 1 3/4” OD Diameter
- Designed to work with all ATV & UTV radiator hoses.
- Speed up install and eliminate coolant loss
- INCLUDES: 2 Clamps