MB Quart Offroad Head Unit, Touch Screen

Features:

• Meets or exceeds IPX67 requirments for water and dust proofing. LIFE SHIELD: Designed and tested against the elements. Waterproof, dustproof, snowproof or shockproof. Built to handle the outdoors
• Features Apple® CarPlay®, which brings more control and integration with your iPhone
• Source Type: AM/FM/WB/Bluetooth allows all access to radio stations and content from bluetooth enabled devices
• Input Types: Bluetooth, RCA, USB
• Apple® Control: Wired Apple® CarPlay®
• Android Auto: Wired Screen Share
• Control Buttons: Unit has a master knob, zone mute buttons, sub level buttons, and a full touchscreen 7-inch display
• Bluetooth Connect: Bluetooth Connect allows your phone or other bluetooth enabled device to be quickly paired to the source unit without a complicated pairing process
• Weather Band: Includes built-in weather band radio. NOAA NWR Weather Band Frequency
• Video Input: Two video camera inputs via a RCA style connector (no audio). One video output via a RCA style connector (no audio)
• Main Connector Type: MOLEX connector for simple installation and removal of unit when needed
• Media Screen: 7″ high-contrast touchscreen display

You Can Add The Relay Switch Controller To This Head Unit So You Can Control Other Accessories From The Touch Screen:

This relay bank features four 20-amp (max) circuits that are plug-and-play and controlled by the GMR7V1 Source Unit . This allows users to easily add, wire, and control any switchable 12V accessory in their vehicle:

Four 12V circuits – 80A(max) total / 20A(max) per circuit

Size: 6.875″ x 2.75″ x 1.25″

Has a simple three-wire connection. Connect the relay bank to the GMR7V1 (sold separately) via the male JST connector to the female JST connector on the GMR7V1 labeled ‘AUX TRIGGER’. Provide 12V power/ground to the GMR-RB4 via a 8 AWG wire with an 80A fuse on the 12V+ wire.

Adding 12V accessories to each 20A (max) circuit is done via a simple 12V power and ground connection.

Quickly and easily know which fuse is blown via the glowing LED indicator that will light as long as a load is still connected to the circuit.