Polaris RZR Turbo S Driveshaft, Carrier Bearing Combo Kit

$1,196.99

Financing As Low As 0% Available "See Options"

Ice Crusher Heater Replacement Parts, Add On Options

Vehicle Fitment Info In Tabs Below

In Stock Item (See Below Shipping Tab)

Attach To Bearing, Route Around for Easy Access Greasing

None Yes, Please +$31.99
This Product Earns $59.85 In Cash Back
Dfb B American Cash Logo

Add to Wishlist

Sandcraft Motorsports Driveline And Carrier Bearing Kit For Polaris RZR Turbo S Models

Upgrade Your RZR Turbo S Driveline And Carrier Bearing With A Balanced Correctly, 2X Stronger Then OEM Driveshaft And Industry Leading Carrier Bearing Kit

Finally you can solve one of the largest issues with your UTV Drivetrain with our upgraded Driveshafts and Carrier Bearing Combo!

Stop all vibration with a true phased and balanced Driveshafts along with correcting the operating angle.

This is the perfect solution for the smoothest ride possible!

INCLUDES:
• 2 Driveshafts (FRONT PROP SHAFT AND REAR DRIVESHAFT PHASED AND BALANCED)
• CARRIER BEARING (GEN3 WILL BE INSTALLED ON THE DRIVESHAFT)

Upgraded your UTV Driveline Today to prevent your Driveshafts from breaking and twisting under pressure.

Dl Cb Combos Callouts V W
Cb Info Slide V Web

Sandcraft Motorsports Front Prop & Rear Drive Shafts

Why Sandcraft Drive Shafts:

Sandcrafts UTV Drive Shafts are Rated 3 times stronger than stock with larger U-joints that are automotive rated for speed, Along with matching yokes.

The Overall diameter of the shafts are increased with double the thickness of the walling compared to stock/OEM Drive Shafts from the manufacturer.

Rotation & Phasing to Match:

These are manufactured to perfection with True Phasing and Balancing during the process, this allows your rotations to match and clear up vibrations.

The OEM drive shafts are rated at 40 MPH, when you are exceeding that speed flex and pressure start to bend your Drive Shafts.

Sandcrafts Drive Shafts are engineered to match your machines capabilities & handle the power all the way to the wheels.

We are the ONLY COMPANY in the world with this design so don’t waste your time with the copycats.

Sandcraft Motorsports Driveline Combo Setup

Sandcraft Motorsports Carrier Bearing

Sandcraft Motorsports is the Pioneer to this solution that reduces vibration & chattering. Their innovative, Patent pending, Carrier Bearing assembly! Designed with off-roading in mind, it improves the driveline angle and raises the height for more ground clearance. Providing your UTV the long term longevity you want & deserve.

How Perfection Is Made:

Sandcraft Motorsports Drive Shaft

Fully Sealed Bearing & Fully Greasable

We have created and patented this design to be a GREASABLE bearing while having 3 layers of protection to keep dirt, sand, mud, and water out.

Self-Aligning Bearing

Patented Design, Sandcrafts Auto Set Angle self-aligning bearing reduces side load on your carrier bearing from the prop-shaft – a must have if you want to keep vibrations to a minimum and the life of your bearing long.

Our all new auto set angle & 2 piece design will lower installation time dramatically, It allows you to press the bearing onto the shaft and install with minimal effort.

Side loading the bearing leads to pre-mature wear and failure. The auto set angle features solves for that problem.

Add On Options

Add Grease Whip

  • IF YOU OWN OUR GEN3 CARRIER BEARING THIS NEW GREASE WHIP IS A MUST HAVE!!!
  • Do you like that you can service your GEN3 carrier bearing, but dread crawling under your RZR to remove the skid plates to access the carrier?
  • Problem solved!!! Just insert the grease tube into the carrier bearing and you can run the whip right through your center console!
  • *FITS ALL SANDCRAFT CARRIER BEARINGS

Learn More About Sandcraft Motorsports:

Sandcraft Carrier Bearing Grease Whip

Manuals

Install Guide

Download Document

Sandcraft Motorsports proudly crafts all of our products by hand in the U.S.A. We build our parts to withstand the toughest of conditions, as long as they have been installed correctly and have not been modified, altered, improperly installed or otherwise not used as originally intended. We carry a limited guarantee our parts for life to the original purchaser from failures that are due to craftsmanship, material failure or any other factors that are determined to be our responsibility.

Any In Stock items will be shipped within 24-36 hours of order processing Monday through Friday, orders placed on Saturday or Sunday will be processed Monday. Your order confirmation will be updated as soon as shipping is setup.

Any Production Run Items range from 12-14 Business Days and will ship once ready, your order confirmation will be updated as soon as shipping is setup.

Sand Paddle Tires – We Try to Stock all Standard sizes but inventory does change daily and if we are currently in a production run for Tires it could take 6-8 weeks.

Drivelines – These are traditionally A Stocked Item but At Times They Do Take 12 – 15 Business days to ship because They Balance Them correctly before they leave.

Make Model Year
Polaris Off Road RZR XP Turbo S 2018 - 2021
Polaris Off Road RZR XP Turbo S Velocity 2019 - 2021

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Continue as a Guest

Don't have an account? Sign Up

You may also like…

5% Off Sale

UTV Steering Rack Stabilizers

Polaris RZR XP Turbo S Steering Rack Stabilizer

$978.49

Ice Crusher Heater Replacement Parts, Add On Options

10% Off Sale

UTV Exhausts

Polaris RZR XP Turbo Exhaust System

From: $799.99 From: $719.99

Ice Crusher Heater Replacement Parts, Add On Options

UTV Skid Plates

Polaris RZR XP Series Skid Plate with Rock Sliders

From: $894.99

Ice Crusher Heater Replacement Parts, Add On Options

5% Off Sale

UTV Limit Straps

Polaris RZR XP Turbo S Limit Straps, Full Kit

$246.99

Ice Crusher Heater Replacement Parts, Add On Options