High Lifter APEXX Rear Control Arms For Polaris Ranger Models
APEXX Ranger Rear Control Arms, Stronger, Adjustable, Engineered For The Most Punishing Terrain With 1.75″ Additional Ground Clearance, Raked Forward 1.5″.
Whether you ride in deep mud or over rocky trails, the need for stronger Ranger Rear Control control arms with added ground clearance is extremely important.
Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires.
- This is A Set Of 4 Arms
- Uses OEM Upper Bushings (Arms Come With Lower Bushings Installed Already)
Heavy Duty Strength
High Lifter’s new heavy duty control arms add more support than factory. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a typical ride.
High Lifter arms are constructed out of 1.5” DOM with .120 wall tubing. This is a 40% increase in size and a 25% increase in steel thickness for added durability and strength.
Tire Fitment: Up to 31″
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
- Adjustable heat-treated collars for camber adjustability with a 1” thread
- Ladder bar compatible with the 1.5” ID clamps
- Extreme duty 1.5” x .120” DOM steel construction
- 1.75” of added ground clearance compared to OEM lower arm
- Limited Lifetime Warranty (Excludes wearable items like bushings, bearings, cones, and heim joints)
Built in Adjustability
The lower arms also feature an adjustability component in the bushing collars to eliminate premature wearing that can come from the addition of lift kits, portals, or larger tires. When the kit is set to the factory position, you have 3/8” of adjustability camber in and out. Heat treated and plated adjustable bushing collars allow you to be confident in the strength you’re adding to your ride.
This kit comes packaged and preadjusted to the factory position, and factory bushings and caps should be used for installation.
Increased Ground Clearance
We maximized ground clearance by strategically arching the lower control arm with double and TRIPLE bends.
This unique design allowed us to get an additional 1.75” of ground clearance to avoid impacting those nasty trail obstacles.
These bends maintain the factory geometry, which helps reduce wear on components like axles and tie rods. Our forward arms allow you to run larger tires without a suspension lift.
We’ve improved the upper control arm by repositioning the sway bar tab. This will reduce the extreme angles places on the sway bar links and reduce wear.